The salt spray corrosion test chamber is widely used in the corrosion resistance test of various products such as metal, paint, inorganic and organic film. How can we make our salt spray test chamber have a long life and is in the best condition? Paper Tube Box,Paper Card Eyelash Box,Tubular Packaging Boxes,Duplex Corrugated Boxes Shenzhen Yi Ding Peng Packaging Design Co., Ltd. , https://www.ydppackaging.com
First, start and stop maintenance:
a) The water in the saturator needs to be drained when the test chamber is not used for a long time without using salt spray;
b) When re-use, it is necessary to fully check whether the electrical system of the tester is normal before starting.
Second, post-test maintenance:
a) In order to avoid the calculation of the sedimentation amount affected by the accumulation of crystals in the salt solution, the solution in the metering cup should be poured out and washed in time after the test;
b) After the test, the oily water should be discharged;
c) After each test, clean the test chamber, water tank, pressure tank and dense water tank with clean water.
Third, other
a) Keep the water used for the test brine and the saturator clean, which can improve the service life of the nozzle and the saturator;
b) The salt solution after spraying shall not be reused;
c) Salt spray corrosion test chamber should be regularly replaced with water stored in the saturator during normal use;
d) It is strictly forbidden to clean the control panel with water and various liquids;
e) Direct sunlight and other heat sources are strictly prohibited;
f) The salt spray corrosion test chamber should be placed horizontally and kept firm.
Lin frequency Xiaobian comprehensive use of the above salt spray corrosion test box to pay attention to the hopes can help you, sincerely welcome new and old friends to consult and purchase. Choosing a forest frequency gives you peace of mind and peace of mind.