With the rapid development of society, great changes have taken place in people's clothing. The appearance of stitchless buttons makes people even more concerned about the buttons will be lost, but there is still a large part of the buttons need to be sewn on the clothing. Sewing a button is a technical activity. If the button is not tightly stitched, it can easily loosen or fall off. How to sewn the button is not only beautiful and firm? Here's how to sew the correct method of sewing buttons. Button Category: Buttons are divided into four-hole buckles, two-hole buckles and buttons with feet. The four-hole buckle is the most common button. Double-row parallel stitching or cross-stitching can be used to sew this kind of button. There are only two holes on the buckle surface of the double-hole buckle. They are often used as shirt buttons, and thread holes with foot buttons. On the back of the button, these buttons are rich in style and decorative. Suture selection: When sewing a button, it is recommended to use a special button thread, which is thicker than ordinary sewing thread and strong. If you use ordinary sewing thread, then when you perform the following steps, you need to sew a few more times back and forth. The button thread has a variety of colors. Try to choose the same or similar color as the button body. Four-hole button parallel seam method: 1) According to the thickness of the line, use double or single seam. Tie the knot and pick a pin at the point where the clothes are ready to sew. 2) The needle thread penetrates into the back hole of the button and passes through the front of the button; 3) Penetrate the button in the hole next to it, and then wear the clothes; 4) Pull the stitches under the clothes, keeping a 3 mm gap between the clothes and the buttons; 5) Loose needlework in and out of the two holes and clothing 3 to 4 times, and then in the same way out of the other two holes; 6) Use a needle thread to wind the wire harness between the button and the clothing for 3 to 4 turns; 7) When winding the last lap, let the needle thread pass through the middle of the coil; 8) Apply a little force and tighten the coil; 9) Put the needle thread into the clothing and make a seam stop under the clothing. Four-hole button cross stitch method: Four holes are deducted from the above-mentioned parallel seam method, and cross seam method can also be used. This kind of sewing method is mostly used for sewing decorative buttons. Double hole button sewing method: Like the four-hole fastener, it is also wrapped around the feet after threading, and finally knotted. Foot button sewing method: 1) Tie the knot, pick a stitch at the stitching position of the fabric; 2) Let the needle thread pass through the small hole behind the button; 3) re-inject the needle at the initial needle position; 4) Reserve 1cm gap between buttons and fabric; 5) Repeat the above steps 2 to 3 times, use a needle thread to wind the wire bundle between the button and the fabric for 1 to 2 turns; 6) The needle thread passes through the back of the fabric, and the sewing knot is closed to complete sewing of the button. There are different sewing methods for different buttons. Hand-stitched buttons are sometimes more delicate than sewing machines. It is no longer afraid to learn this trick! Want to find out more about the button: Visit China Button Industry Network Poly Satin Fabric,Poly Satin Drapes,Polyester Satin Fabric,Jacquard Poly Satin Fabric Shaoxing City Laiteng Imp.&Exp Co.,Ltd , https://www.laiteng-tex.com