The solar LED street lamp adopts high-power LED as the illumination source. The LED light source has the highest luminous efficiency. It not only has high luminous efficiency but also has a long service life. With the continuous development of technology, LED light source is gradually being widely used in solar street lamps and ordinary City circuit lights. It is believed that solar LED street lights will soon replace ordinary street lights in the near future. So what conditions should solar LED street lights meet when they are installed? 1. The cantilever length of general solar LED street lamps should not exceed 1安装4 of the installation height; 2. The elevation angle of the light source lamp of solar LED street light should not exceed 15o; 3. The layout, installation height and spacing of the solar LED street lamps should be determined after the calculation with the actual installation location data and the actual customer requirements data; 4. When adopting the high pole lighting mode, the luminaire and its configuration, the installation position, height, spacing of the lamp post and the projection direction of the maximum light intensity of the luminaire shall meet the following conditions: 1> The pole cannot be installed in a dangerous place or in a place that seriously obstructs traffic during maintenance; 2> The maximum light intensity projection direction and vertical angle of the solar LED street light should not exceed 65o; 3> The high pole lights set in the urban area should be coordinated with the environment on the premise of meeting the lighting function. Spectral solar street lamp manufacturers always adhere to the business philosophy of ensuring quality, matching components, reasonable installation and perfect after-sales service, and won the praise of customers. Network Metallic Tulle Mesh,100% Polyester Metallic Tulle,Metallic Yarn Fabric,Pleated Metallic Tulle FUZHOU TEXSTAR TEXTILE CO.,LTD. , https://www.fabrictulle.com