The street lamp monitoring system consists of a control center and a number of monitoring terminals. The monitoring center is mainly composed of a monitoring computer equipped with street lighting automation control software, a radio station and a transmitting tower. It mainly controls the terminal and controls the terminal. The various information transmitted is processed, and the data is saved and printed. The layout of the city street lamp and the status of the current monitoring terminal are displayed on the display screen. The monitoring terminal is composed of a radio station (communication station) and a computer motherboard. The computer board is responsible for collecting, inputting, and monitoring the three-phase voltage of the street lamp and the magnitude of each load current. The computer motherboard is also responsible for managing the radio, and the radio station can communicate with the monitoring center in both directions. On the one hand, the working condition of the street lamp, the voltage and current of each phase, the contact state of the contactor, the clock calendar of the board, and the switching time of each main load are reported to the monitoring center through the radio station. . It is displayed by the system microcomputer in the monitoring center, archived and collected into tabular data. At the same time, the computer motherboard also receives the following various messages through the radio station, such as: immediately turn on the light, receive a new clock from the monitoring center to modify the clock inside the board, and receive a new set of switch light time to replace the old one. Turn off the light. High Waist Wide Leg Lady Pants,Ladies Loose Pants,Print Flower Pants,Elasticated Waist Trousers SHAOXING ZHENNIU TRADING CO.,LTD , https://www.zhenniuclothes.com