Glass cleaning procedures and applications Two Side Brush Fabric,Polar Two Side Brush Fabric,Fleece Two Sides Brush Fabric,Polar Fleece Two Sides Brush Fabric Shaoxing Yihui Textile Co.,ltd. , https://www.yihuitextile.com
1. Rub the glass: first wipe the glass frame with a towel, then use a glass to scrape the diluted glass aqueous solution, evenly apply the glass from top to bottom, repeat the above steps, and scrape it from top to bottom with a glass scraper. Wipe the water marks left on the frame with a dry towel. The water marks on the glass must be scraped with glass, otherwise it will leave a trace on the glass.
2, the vinegar and water in a ratio of 1:2, put into the spray, spray on the glass and then wipe, you can wipe very clean.
3, add 5% of the Amonia solution or gasoline in the basin, use it to clean the glass, wait until the glass is dry and then wipe it clean with a dry cloth, the glass can be spotless, bright and transparent. When cleaning the glass, you can use different models of the window cleaner to see if it is double-glazed or single-layer glass. It is convenient, labor-saving and safe to use the window cleaner.
4, if the surface of the glass is moldy, the ratio of hydrofluoric acid (HF) to water 1:8 can be adjusted (Note: more than 1:8, it will cause damage to the opponent), wipe the glass, pay attention, be sure to do well Corrosion protection work, the skin can not touch HF, otherwise the skin will be severely corroded. After wiping the glass, wipe it again with water and finally dry the glass.